Product Description

Applicable thread:	Cotton, polyester and nylon thread (#30-#120)
Applicable bobbin:	Diameter(A):21-26 mm / Hight(B):9-12 mm
Winding time:	20-40 sec. (Example:About 20 sec. with 60 Hz in using #120 thread/Regular hook bobbin)
Hopper capacity:	About 150 bobbins (Regular hook bobbin)
Power source:	100-240V, single-phase, 50/60 Hz

	Easy operation   Once the thread isset, TUSII automatically and continuously winds up the thread on the bobbins. Thread winding amount is mechanically detected and stabilized, and it can be preset with ease only by turning a control knob. Long life & Economical   A heating wire is used to cut thread assuring exact cutting and extremely long life. And economical design requires only small power consumption.

• Advantages:
• Lower Costs - Less costly than pre-wound per bobbin and large lot purchases are not necessary.
• True Color Consistency - Pre-wound colors can often vary noticeably which affects sewn product quality.
• Reduces Waste/Better Inventory Control - An operator needs only one thread spool instead of two. All thread winding is done in a central location which ensures that the correct quantity of thread is used to do the job - No partially used thread cones.
• Cuts Machine Downtime - Increases operator production (Operator-wound bobbins consume operator time).
• Guaranteed Yardage On Each Bobbin - Operator-wound bobbins yardage varies which can lead to run outs, seam repairs, more bobbin changes and seconds.
• Consistent Thread Tension - Ensures smoother stitches and neater seams.
• Better Production Planning - Automatic Bobbin Winder lets you control the amount of thread being wound which permits better production plans.

Advantages︰ Only 8 seconds to wind most bobbins
Hopper holds more than 100 bobbins
Automatic "shut-off" system when bobbin supply or thread is exhausted
No operator required
Digital Counter permits you to pre-set amount of bobbins to be wound
Built-in circuit breaker
Two Thread Tension Adjustments

Product Image